Home > Advance Program Flashlights >

PFlexPRO Advance Program P60 Drop In with Interchangeable Contacts for Surefire and other P60 Hosts
PFlexPRO Advance Program P60 Drop In with Interchangeable Contacts for Surefire and other P60 Hosts

Alternative Views:

Our Price: $70.00

Product Code: P60-AP-IC





Copper Wrap:

Description Technical Specs Extended Information
This is the PFlexPRO Advance Program drop in. It is built with the Advance Program driver package described above. With it's advance thermal control, you can safely run your P60 in direct drive mode for maximum output. The positive contact can be easily changed or replaced by simply screwing one out and screwing another in with no tools or soldering. The drop in is fully potted and for maximum durability and reliability. The reflector shaft is polished to enhance thermal transfer to the host. The emitter in mounted on a 16mm copper MCPCB and installed with an additional thermal pad on top of the MCPCB. The thermal pad enhances the thermal flow by providing an alternate, more direct heat path to the reflector. The drop in includes 2 springs and a solid button contact -the solid contact improves fitment of long protected batteries. The drop in also includes 2mil and 4 mil copper with instructions for wrapping and installing in the host. This drop in will turn your P60 host into one of the most advanced and user configurable flashlights available. (The drop in is available with your choice of emitters and reflectors (smooth, smooth hybrid* and orange peel -*see photo for smooth hybrid reflector)

The standard length version is best for most P60 hosts like Solarforce and Surefire hosts that have been bored for use with an 18650 battery. If you're Surefire is 'stop bored', its best to use the short version (If a Surefire is 'stop bored', an 18650 battery will not pass through the drop in opening into the battery tube),

The drop in comes with a 'copper wrap set' which consists of 12" of 4mil and 4" of 2mil copper. The copper can be reused many times before it needs replacing. The additional copper wraps are mainly available for other drop ins you may have and want to wrap with copper.

The optional lenses are for Solarforce flashlights only. If this drop in will be installed in a Solarforce P60 host, you can increase the output by about 6% just by upgrading the lens. These lenses are AR coated (both sides), scratch resistant and smudge resistant. The Micro-Textured lens will smooth out the beam pattern with negligable reduction in throw. The Micro-Textured lens has the greatest impact when combined with a Smooth or Smooth-Hybrid reflector. If you're a fan of orange peel reflectors, I recommend the Micro-Textured lens combined with a Smooth-Hybrid reflector for an even better beam pattern and more output.

Average Rating: 5 of 5 Total Reviews: 2 Write a review »

  1 of 1 people found the following review helpful:
QUALITY January 17, 2017
Reviewer: Anonymous Person  
Best drop ins I've ever bought, hands down. Xpl hi v2 3a has the perfect tint. And throwing with 1360 lumens with the direct drive, she brought new life to my p60, a BEAST !

Was this review helpful to you?

  1 of 1 people found the following review helpful:
PFlexPRO Advance Program P60 Drop In July 15, 2016
Reviewer: David from Wichita, Ks  
I am a repeat buyer because these drop ins are just what I need.  The output is awesome,
and they are very well made.

Was this review helpful to you?