Home > P60 Drop Ins >

P60 3.8A 22 MG with Interchangeable Contacts/Short for Surefire and Other P60 Flashlight Hosts
P60 3.8A 22 MG with Interchangeable Contacts/Short for Surefire and Other P60 Flashlight Hosts


 
Alternative Views:


Our Price: $60.00


Product Code: P60-3.8-ICS-22M-SHORT


Power*:


Emitter*:


Reflector*:


Step Down Time:


Battery:


Copper Wrap:


Qty:  
Description Technical Specs Extended Information
 
This Drop In is a shorter version of the PFlexPRO Interchangeable Contact drop in. The shorter version increases compatibility with flashlights like Surefire that have a restrictive drop in chamber. Click on the 'Extended Information' tab for more information.

This is the 'Top of the Line' PFlexPRO drop in. It is driven at 3.8A (1200+ lumens) or 3.04A (950+ lumens). It uses the 22 mode group driver for maximum mode flexibility (see specs for mode group list). The positive contact can be easily changed or replaced by simply screwing one out and screwing another in with no tools or soldering. The drop in is fully potted and lock out leads are exposed through the potting material -these leads can be connected with conductive paint to disable the mode group change function. The reflector shaft is polished to enhance thermal transfer to the host. The emitter in mounted on a 16mm copper MCPCB and installed with an additional thermal pad on top of the MCPCB. The thermal pad enhances the thermal flow by providing an alternate, more direct heat path to the reflector. The drop in includes 2 springs and a solid button contact -the solid contact improves fitment of long protected batteries. The drop in also includes 2mil and 4 mil copper with instructions for wrapping and installing in the host. The drop in has a 'high mode step down' which increases battery life and reduces the heat load. The 'high mode step down' is adjustable, but the drop in will be shipped as follows: 3.8A -3 minute step down - 3.04A - 4 minute step down

This 3.8A drop in is best suited for an 18650 battery. If your host is not bored for an 18650 battery, consider the 3.04A version of this drop in with an optional 16650 battery. If you use this 3.8A drop in with a 16650 battery, expect higher output, but less run time. This drop in is not compatible with 2xcr123, 2x16340, 2x16350 or any other multi-battery configuration that delivers more than 4.5v.

The drop in comes with a 'copper wrap set' which consists of 12" of 4mil and 4" of 2mil copper. The copper can be reused many times before it needs replacing. The additional copper wraps are mainly available for other drop ins you may have and want to wrap with copper.


Average Rating: 4.5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
xpl v6-2A with crescendo December 5, 2018
Reviewer: Tom from Arkansas  
Very well built ramping is easy to use.  just can't figure out the memory and thermal limit function.  Would give it 5 stars if I could figure out memory and thermal limit.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
XPL HI with Crescendo September 7, 2018
Reviewer: Gordon from Europe  
Amazing Drop-in! From the packaging up to build quality! Smooth(hybrid) reflector is one of the best i've seen so far. And Crescendo...no words to describe my joy using it. It can be selected at the precise output you need. No more annoying driver adjustment to get the output you prefer which often is not exact you wanted. For me, this is huge. Great work Randy!

Was this review helpful to you?

  3 of 3 people found the following review helpful:
 
Dropin review July 23, 2015
Reviewer: Dan from Fargo, ND  
This is by far the best p60 dropin I've ever owned.  The selection of mode groups is really great, the color of the 2A is perfect, but the thing I like the most...the output is phenomenal.
I like protected batteries but have never been able to use them in my 6P.  I installed the non-spring contact and now the NCR18650 protected fits perfectly.  Great Drop In!!

Was this review helpful to you?