Home > P60 Drop Ins >

22 Mode Group with Interchangeable Contacts for Surefire and Other P60 Flashlight Hosts
22 Mode Group with Interchangeable Contacts for Surefire and Other P60 Flashlight Hosts

Our Price: $55.00

Product Code: P60-3.04-3.8-22M





Step Down Time:

Copper Wrap:

Description Technical Specs Extended Information
This the 'Top of the Line' PFlexPRO drop in. It is driven at 3.8A (1200+ lumens) or 3.04A (950+ lumens). It uses the 22 mode group driver for maximum mode flexibility (see specs for mode group list). The positive contact can be easily changed or replaced by simply screwing one out and screwing another in with no tools or soldering. The drop in is fully potted and lock out leads are exposed through the potting material -these leads can be connected with conductive paint to disable the mode group change function. The reflector shaft is polished to enhance thermal transfer to the host. The emitter in mounted on a 16mm copper MCPCB and installed with an additional thermal pad on top of the MCPCB. The thermal pad enhances the thermal flow by providing an alternate, more direct heat path to the reflector. The drop in includes 2 springs and a solid button contact -the solid contact improves fitment of long protected batteries. The drop in also includes 2mil and 4 mil copper with instructions for wrapping and installing in the host. The drop in has a 'high mode step down' which increases battery life and reduces the heat load. The 'high mode step down' is adjustable, but the drop in will be shipped as follows: 3.8A -3 minute step down - 3.04A - 4 minute step down.

The drop in comes with a 'copper wrap set' which consists of 12" of 4mil and 4" of 2mil copper. The copper can be reused many times before it needs replacing. The additional copper wraps are mainly available for other drop ins you may have and want to wrap with copper.

The optional lenses are for Solarforce flashlights only. If this drop in will be installed in a Solarforce P60 host, you can increase the output by about 6% just by upgrading the lens. These lenses are AR coated (both sides), scratch resistant and smudge resistant. The Micro-Textured lens will smooth out the beam pattern with negligable reduction in throw. The Micro-Textured lens has the greatest impact when combined with a Smooth or Smooth-Hybrid reflector. If you're a fan of orange peel reflectors, I recommend the Micro-Textured lens combined with a Smooth-Hybrid reflector for an even better beam pattern and more output.

Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
WOW! November 19, 2014
Reviewer: Kevin from Seattle  
these are the best dropins I've ever seen -they are incredibly bright.  The instructions are great too.  Another bonus, they come with plenty of copper foil for wrapping.

Was this review helpful to you?