Skip to content
Shop Our Categories
P60 Drop Ins
TRIPLES - QUADS
P60 + Host
Advance Program Flashlights
Wrapping a P60 Drop In
Lumens vs Real OTF Lumens
Reverse Clicky vs Forward Clicky
LED Tints and Power
Nav Menu 2
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
Account / Login
Advance Program Flashlights
PFlexPRO Convoy L2 HAIII Lumen Forward Clicky -Advance Program LED Flashlight
XML2 U4-1A 7000K
XML2 U3-2A 6200K
XML2 U3-3D 5000K
XML2 U2-5D 4000K
XML2 7A2 3000K
XPL V5-2A 6200K
XPL V5-3A 5200K
XPL V6-3D 5000K
XPL 90CRI 3000K
XPL V2-7C3 2900K
XPL HI V3-1A 7000K
XPL HI V3-3A 5200K
XPL HI V2-5D 4000K
Nichia 319AT D440 70+CRI 5000K
Nichia 219C D320 70+CRI 5000K
Nichia 219C D240 90+CRI 4000K
Enhanced Forward Clicky [Add $5.00]
Xtar VC2 Plus [Add $24.00]
PFlexPRO L2 Advance Program flashlight -Fully Potted
PFlexPRO / Convoy L2 Ultimate build -This light is a beast! With an XML2 emitter, the throw is amazing but with the XPL HI emitter, the throw is insane!
The L2 is designed as a 26650 flashlight -the reason for a 26650 battery is high capacity. The problem is, many 26650 batteries are similar in capacity to an 18650. The higher capacity 26650 batteries are quite long and usually will not fit an L2. I have machined a step into the tail cap so the battery can actually extend slightly beyond the battery tube. This tail cap recess along with a solid contact in the head means it can take the longest 26650 battery with capacities over 5000mah. It can even take a 26700 battery!
With such high battery capacities and the L2's massive head, this is the perfect light for the Advance Program Driver package running on full direct drive.
Because the battery compartment size has been increased, the shorter 65mm batteries are not compatible, but why would you want to use a low capacity 26650 battery anyway.
PFlexPRO / Convoy L2 build -fully potted with a solid copper 20mm MCPCB, HAIII, with your choice of emitters
This flashlight has great thermal properties and is one of the best performers period.
Automation wire (robotics) is used to bypass the switch spring (more durable than a braided spring)
For insane output, the XML2 emitters will deliver over 1800 lumens with a throw around 650 meters (output varies with emitter choice)
For insane throw, the XPL HI emitters will deliver over 1500 lumens with a throw around 850 meters.
Choice of XM-L2, XP-L and XP-L HI emitters
Includes an EVVA 26650 5200mah battery and adapter rings to use a 67+mm 18650 battery.
AR Glass lens
Forward clicky Switch with copper bypass installed on spring
Click here to read about
'Enhanced Forward Clicky Switch'
See photo for size comparisons...the L2 is in the center and a C8 is just to the right.
Verify that your charger will handle a 26650 battery -most 18650 chargers will. The charging is the same as an 18650, it just takes a larger diameter slot to fit the 26650 battery. If you need a charger, there is an option for the XTar VC2 Plus charger that will charge a wide range of batteries, including 18650, 26650 and even NiMH AA and AAA batteries.
Input voltage: 2.9V-4.5V
Current: Direct Drive
Memory function: Selectable
PWM: 16 kHz
Reverse Polarity Protection
Low voltage protection: At 2.9-3v, the light will drop to low mode and slowly flash
User Programmable Advance Program driver with active thermal control
(complete instructions will be included)
PFlexPRO Convoy M1 HAIII 1500+ Lumen Advance Program Forward Clicky LED Flashlight
PFlexPRO Convoy C8 HAIII 1500+ Lumen Advance Program LED Flashlight
PFlexPRO Convoy S2+ HAIII 1500+ Lumen Advance Program Forward Clicky LED Flashlight
Solarforce L2P + PFlexPRO Advance Program LED Drop In
PFlexPRO Advance Program P60 Drop In with Interchangeable Contacts for Surefire and other P60 Hosts
S2plus-Nichia Triple Emitter Light Advance Program
PFlexPRO Advance Program Short P60 Drop In with Interchangeable Contacts for Surefire Hosts
P60 Quad Emitter Drop In - Advance Program
Share your knowledge of this product.
Be the first to write a review »