Home > P60 Drop Ins >

P60 1.9A LED Drop In with Interchangeable Contacts for Surefire and Other P60 Flashlight Hosts
P60 1.9A LED Drop In with Interchangeable Contacts for Surefire and Other P60 Flashlight Hosts


 
Alternative Views:


Our Price: $50.00


Product Code: P60-1.9-IC


Power*:


Emitter*:


Reflector*:


Lens:


Step Down Time:


Copper Wrap:


Qty:  
Description Technical Specs
 
22 Mode Group P60 Drop In with interchangeable contacts powered at 1.9A for extended run time- Fully Potted with your choice of
emitters mounted on a solid copper MCPCB (Noctigon).
A 1.5A version is an option for even longer run times.
This drop in is a good choice for the Nichia high CRI emitters. Many Nichia High CRI emitters are capable of running at higher currents,
but the efficiency drops considerably.
The Nichia 219C D240 90+CRI (4000K or 5000K) will deliver about 500 lumens at 1.9A.

The drop in comes with a 'copper wrap set' which consists of 12" of 4mil and 6" of 2mil copper. The copper can be reused many times before it needs replacing. The additional copper wraps are mainly available for other drop ins you may have and want to wrap with copper.

The optional lenses are for Solarforce flashlights only. If this drop in will be installed in a Solarforce P60 host, you can increase the output by about 6% just by upgrading the lens. These lenses are AR coated (both sides), scratch resistant and smudge resistant. The Micro-Textured lens will smooth out the beam pattern with a negligable reduction in throw. The Micro-Textured lens has the greatest impact when combined with a Smooth or Smooth-Hybrid reflector. If you're a fan of orange peel reflectors, I recommend the Micro-Textured lens combined with a Smooth-Hybrid reflector for an even better beam pattern and more output.

Share your knowledge of this product. Be the first to write a review »