 |
|
PFlexPRO 22 Mode Group (user selectable) with adjustable High Output step down
PFlexPRO / Convoy M1 Ultimate build -everything about this build is
incredible -light output, thermal management, light output, size in
hand, light output, throw, light output (did I mention light output?)
PFlexPRO
/ Convoy M1 is the brightest single 18650 single emitter flashlight
available (using ANSI FL1 test methods it typically delivers over 1250 lumens
and 285 meter throw with higher power bins!)
PFlexPRO / Convoy M1 build -fully potted with a solid copper 20mm MCPCB, HAIII, with your choice of emitters
This flashlight has great thermal properties and is one of the best performers for its size
Modes groups are user selectable using just the switch (see specifications for available mode groups)
Automation wire (robotics) is used to bridge the switch spring (more durable than a braided spring)
Choice of XM-L2, XP-L and XP-L HI emitters
1250+ lumens with XML2 U4-1A (output varies with emitter choice)
Forward Clicky Switch (this light is also available with a reverse clicky) Click here to read about 'Enhanced Forward Clicky Switch'
|
|
- Input voltage: 2.9V-4.5V
Current: 3.8A
Constant current
Memory function: off-time ½ second
PWM: 4500+Hz
Reverse Polarity Protection
Low voltage protection: At 2.9-3v, the light will drop to low mode and slowly flash
Selectable Mode Groups:
1. 2%-25%-100% -| Memory
2. 100%-25%-2% -| No Memory
3. 2%-25%-100%-Strobe-Beacon -| Memory
4. 2%-25%-100%-Strobe-Beacon -| No Memory
5. 15%-100% -| Memory
6. 100%-15% -| No Memory
7. 100% Only
8. 100%-Strobe -| No Memory
9. Strobe-100% -| No Memory
10. ML-5%-33%-100% -| Memory
11. 100%-33%-5%-ML -| No Memory
12. ML-5%-33%-100%-Strobe-Beacon -| Memory
13. ML-5%-33%-100%-Strobe-Beacon -| No Memory
14. ML-100% -| No Memory
15. 100%-ML -| No Memory
16. ML-100% -| Memory
17. ML-5%-15%-50%-100% -| Memory
18. ML-5%-15%-50%-100% -| No Memory
19. 100%-50%-15%-5%-ML -| Memory
20. 100%-50%-15%-5%-ML -| No Memory
21. 2%-15%-50%-100% -| Memory
22. 2%-15%-50%-100% -| No Memory
To change mode groups, press the switch 8 times quickly, pause, then press the
number that corresponds with the desired mode group
(complete instructions will be included)
|
|
|
M1 review 
